
ASC-33140FC
High Power. Fast Charge.
Know More
WHY ATOMSOURCE
ASC-33140FC Cylindrical LFP Cell
A high-power cylindrical cell designed for fast-charge applications, electric mobility, and energy storage.
15 Ah
Nominal Capacity
3.2 V
Nominal Voltage
48 Wh
Nominal Energy


Fast-Charge Capability
Designed for Faster Energy Turnaround
The ASC-33140FC is designed around continuous fast charging for applications where charging time and equipment utilisation matter.
3C / 45 A
Continuous fast-charge design target
≈ 15 minutes
Target charging time from 10% to 80% state of charge at 25°C

Power When Applications Demand It
5C Continuous Discharge
10C Peak Discharge



5C / 75 A
Maximum Continuous Discharge
5C / 75 A
Maximum Continuous Discharge
Technical Overview
Model
ASC-33140FC
Chemistry
Lithium Iron Phosphate (LFP)
Minimum Capacity
14.5 Ah
Nominal Energy
48 Wh
Maximum Continuous Discharge
5C / 75 A
Nominal Diameter
< 1.5 arcmin
Mass
17-bit absolute magnetic
Cell Format
33140 Cylindrical
Nominal Capacity
15 Ah
Nominal Voltage
3.2 V
Continuous Fast-Charge Rate
3C / 45 A
Peak Discharge
10C / 150 A for 10 seconds
Nominal Length
Approximately 140 mm
Cell Chemistry
The Advantages of LFP Chemistry
Lithium Iron Phosphate chemistry offers a combination of thermal stability, cycle-life potential, and a cobalt- and nickel-free cathode.
Safety-Focused Chemistry
LFP’s thermal stability is an important advantage when designing battery systems for demanding energy storage applications.
Energy on Demand
Battery cells help store electricity for use when generation and demand do not align.

Cycle-Life Potential
Designed for repeated charging and discharging, with cell life dependent on operating conditions and system design.
Cobalt- and Nickel-Free Cathode
LFP chemistry avoids cobalt and nickel in the cathode, offering an alternative approach to battery material selection.
Application Areas
One Cell. Multiple Possibilities.
Explore potential applications for compatible battery systems built around the ASC-33140FC cylindrical LFP cell.

Electric Two- and Three-Wheelers
For battery architectures designed around fast turnaround and repeated daily use.

Battery-Swapping and Fleet Packs
For battery architectures designed around fast turnaround and repeated daily use.

Light Commercial Electric Vehicles
For suitable commercial mobility applications requiring compact, high-power energy storage.

Power Tools and Garden Equipment
For compatible equipment requiring responsive power delivery.
System-Level Engineering
Cell Performance Starts With Proper Integration
Cell performance depends on the design, monitoring, protection, and operating conditions of the complete battery system.



Engineering and Quality
A Process Built Around Cell Consistency
The planned manufacturing approach emphasises material qualification, controlled cell assembly, formation and ageing, electrical testing, grading, and serialised traceability.
01

Step 01
Materials Qualification
Incoming materials and suppliers are evaluated against defined quality requirements.

02

Step 02
Electrode Manufacturing
Active materials are mixed, coated onto metal foils, dried, compressed, and slit into electrode rolls.

03

Step 03
Cell Assembly
Electrodes and separators are assembled, connected, sealed, and filled with electrolyte under controlled conditions.

04

Step 04
Formation and Ageing
Cells undergo controlled initial charging, ageing, and monitoring to establish and assess their electrochemical performance.

05

Step 05
Testing and Traceability
Electrical testing, grading, and serialisation help record cell characteristics and production history.


Let’s Power What Comes Next.
We welcome conversations with battery-pack manufacturers, BESS developers, electric mobility companies, industrial customers, and technology partners looking to explore India’s evolving battery cell ecosystem.

Let’s Power What Comes Next.
We welcome conversations with battery-pack manufacturers, BESS developers, electric mobility companies, industrial customers, and technology partners looking to explore India’s evolving battery cell ecosystem.
Atom Source engineers the foundational hardware behind tomorrow's energy grids and intelligent machines — lithium iron phosphate battery cells and integrated robotic joint actuators, designed, manufactured, and tested in-house in India.
PRODUCTS
Leadership
Company
Technology
Roadmap
COMPANY
Leadership
Company
Technology
Roadmap
IMPORTANT
Investor Section
Datasheets

ASC-33140FC
High Power. Fast Charge.
Know More
WHY ATOMSOURCE
ASC-33140FC Cylindrical LFP Cell
A high-power cylindrical cell designed for fast-charge applications, electric mobility, and energy storage.
15 Ah
Nominal Capacity
3.2 V
Nominal Voltage
48 Wh
Nominal Energy


Fast-Charge Capability
Designed for Faster Energy Turnaround
The ASC-33140FC is designed around continuous fast charging for applications where charging time and equipment utilisation matter.
3C / 45 A
Continuous fast-charge design target
≈ 15 minutes
Target charging time from 10% to 80% state of charge at 25°C

Power When Applications Demand It
5C Continuous Discharge
10C Peak Discharge



5C / 75 A
Maximum Continuous Discharge
5C / 75 A
Maximum Continuous Discharge
Technical Overview
Model
ASC-33140FC
Chemistry
Lithium Iron Phosphate (LFP)
Minimum Capacity
14.5 Ah
Nominal Energy
48 Wh
Maximum Continuous Discharge
5C / 75 A
Nominal Diameter
< 1.5 arcmin
Mass
17-bit absolute magnetic
Cell Format
33140 Cylindrical
Nominal Capacity
15 Ah
Nominal Voltage
3.2 V
Continuous Fast-Charge Rate
3C / 45 A
Peak Discharge
10C / 150 A for 10 seconds
Nominal Length
Approximately 140 mm
Cell Chemistry
The Advantages of LFP Chemistry
Lithium Iron Phosphate chemistry offers a combination of thermal stability, cycle-life potential, and a cobalt- and nickel-free cathode.
Safety-Focused Chemistry
LFP’s thermal stability is an important advantage when designing battery systems for demanding energy storage applications.
Energy on Demand
Battery cells help store electricity for use when generation and demand do not align.

Cycle-Life Potential
Designed for repeated charging and discharging, with cell life dependent on operating conditions and system design.
Cobalt- and Nickel-Free Cathode
LFP chemistry avoids cobalt and nickel in the cathode, offering an alternative approach to battery material selection.
Application Areas
One Cell. Multiple Possibilities.
Explore potential applications for compatible battery systems built around the ASC-33140FC cylindrical LFP cell.

Electric Two- and Three-Wheelers
For battery architectures designed around fast turnaround and repeated daily use.

Battery-Swapping and Fleet Packs
For battery architectures designed around fast turnaround and repeated daily use.

Light Commercial Electric Vehicles
For suitable commercial mobility applications requiring compact, high-power energy storage.

Power Tools and Garden Equipment
For compatible equipment requiring responsive power delivery.
System-Level Engineering
Cell Performance Starts With Proper Integration
Cell performance depends on the design, monitoring, protection, and operating conditions of the complete battery system.



Engineering and Quality
A Process Built Around Cell Consistency
The planned manufacturing approach emphasises material qualification, controlled cell assembly, formation and ageing, electrical testing, grading, and serialised traceability.
01

Step 01
Materials Qualification
Incoming materials and suppliers are evaluated against defined quality requirements.

02

Step 02
Electrode Manufacturing
Active materials are mixed, coated onto metal foils, dried, compressed, and slit into electrode rolls.

03

Step 03
Cell Assembly
Electrodes and separators are assembled, connected, sealed, and filled with electrolyte under controlled conditions.

04

Step 04
Formation and Ageing
Cells undergo controlled initial charging, ageing, and monitoring to establish and assess their electrochemical performance.

05

Step 05
Testing and Traceability
Electrical testing, grading, and serialisation help record cell characteristics and production history.


Let’s Power What Comes Next.
We welcome conversations with battery-pack manufacturers, BESS developers, electric mobility companies, industrial customers, and technology partners looking to explore India’s evolving battery cell ecosystem.

Let’s Power What Comes Next.
We welcome conversations with battery-pack manufacturers, BESS developers, electric mobility companies, industrial customers, and technology partners looking to explore India’s evolving battery cell ecosystem.
Atom Source engineers the foundational hardware behind tomorrow's energy grids and intelligent machines — lithium iron phosphate battery cells and integrated robotic joint actuators, designed, manufactured, and tested in-house in India.
PRODUCTS
Leadership
Company
Technology
Roadmap
COMPANY
Leadership
Company
Technology
Roadmap
IMPORTANT
Investor Section
Datasheets

ASC-33140FC
High Power. Fast Charge.
Know More
WHY ATOMSOURCE
ASC-33140FC Cylindrical LFP Cell
A high-power cylindrical cell designed for fast-charge applications, electric mobility, and energy storage.
15 Ah
Nominal Capacity
3.2 V
Nominal Voltage
48 Wh
Nominal Energy


Fast-Charge Capability
Designed for Faster Energy Turnaround
The ASC-33140FC is designed around continuous fast charging for applications where charging time and equipment utilisation matter.
3C / 45 A
Continuous fast-charge design target
≈ 15 minutes
Target charging time from 10% to 80% state of charge at 25°C

Power When Applications Demand It
5C Continuous Discharge
10C Peak Discharge



5C / 75 A
Maximum Continuous Discharge
5C / 75 A
Maximum Continuous Discharge
Technical Overview
Model
ASC-33140FC
Chemistry
Lithium Iron Phosphate (LFP)
Minimum Capacity
14.5 Ah
Nominal Energy
48 Wh
Maximum Continuous Discharge
5C / 75 A
Nominal Diameter
< 1.5 arcmin
Mass
17-bit absolute magnetic
Cell Format
33140 Cylindrical
Nominal Capacity
15 Ah
Nominal Voltage
3.2 V
Continuous Fast-Charge Rate
3C / 45 A
Peak Discharge
10C / 150 A for 10 seconds
Nominal Length
Approximately 140 mm
Cell Chemistry
The Advantages of LFP Chemistry
Lithium Iron Phosphate chemistry offers a combination of thermal stability, cycle-life potential, and a cobalt- and nickel-free cathode.
Safety-Focused Chemistry
LFP’s thermal stability is an important advantage when designing battery systems for demanding energy storage applications.
Energy on Demand
Battery cells help store electricity for use when generation and demand do not align.

Cycle-Life Potential
Designed for repeated charging and discharging, with cell life dependent on operating conditions and system design.
Cobalt- and Nickel-Free Cathode
LFP chemistry avoids cobalt and nickel in the cathode, offering an alternative approach to battery material selection.
Application Areas
One Cell. Multiple Possibilities.
Explore potential applications for compatible battery systems built around the ASC-33140FC cylindrical LFP cell.

Electric Two- and Three-Wheelers
For battery architectures designed around fast turnaround and repeated daily use.

Battery-Swapping and Fleet Packs
For battery architectures designed around fast turnaround and repeated daily use.

Light Commercial Electric Vehicles
For suitable commercial mobility applications requiring compact, high-power energy storage.

Power Tools and Garden Equipment
For compatible equipment requiring responsive power delivery.
System-Level Engineering
Cell Performance Starts With Proper Integration
A high-power cylindrical cell designed for fast-charge applications, electric mobility, and energy storage.



Engineering and Quality
A Process Built Around Cell Consistency
The planned manufacturing approach emphasises material qualification, controlled cell assembly, formation and ageing, electrical testing, grading, and serialised traceability.
01

Step 01
Materials Qualification
Incoming materials and suppliers are evaluated against defined quality requirements.

02

Step 02
Electrode Manufacturing
Active materials are mixed, coated onto metal foils, dried, compressed, and slit into electrode rolls.

03

Step 03
Cell Assembly
Electrodes and separators are assembled, connected, sealed, and filled with electrolyte under controlled conditions.

04

Step 04
Formation and Ageing
Cells undergo controlled initial charging, ageing, and monitoring to establish and assess their electrochemical performance.

05

Step 05
Testing and Traceability
Electrical testing, grading, and serialisation help record cell characteristics and production history.


Let’s Power What Comes Next.
We welcome conversations with battery-pack manufacturers, BESS developers, electric mobility companies, industrial customers, and technology partners looking to explore India’s evolving battery cell ecosystem.

Let’s Power What Comes Next.
We welcome conversations with battery-pack manufacturers, BESS developers, electric mobility companies, industrial customers, and technology partners looking to explore India’s evolving battery cell ecosystem.
Atom Source engineers the foundational hardware behind tomorrow's energy grids and intelligent machines — lithium iron phosphate battery cells and integrated robotic joint actuators, designed, manufactured, and tested in-house in India.
PRODUCTS
Leadership
Company
Technology
Roadmap
COMPANY
Leadership
Company
Technology
Roadmap
IMPORTANT
Investor Section
Datasheets